Restore crisp, factory-quality imaging on your Mercedes-Benz surround view system with this direct OEM replacement camera (A0009053902). A faulty camera leaves you with a blank screen, distorted feed, foggy lens or warning messages on the COMAND / NTG display — this replacement returns the surround view system to full original performance.

⚠️ IMPORTANT – PART NUMBER CHECK REQUIRED
Before purchasing, please remove your existing camera and confirm the part number printed on the housing reads A0009053902 (also shown as 0009053902 or A 000 905 39 02). Mercedes-Benz used several different camera variants across these model ranges and they are not interchangeable. If your existing part number does not match, this camera will not function correctly.

Connector Type
Fitted with the original-style OEM factory connector built directly into the housing — plug-and-play into your existing Mercedes-Benz wiring. No cutting, splicing or adapters required.

High-Quality Imaging
OEM-specification lens and image sensor deliver the same sharp, true-colour image as the original Magna-built unit, with correct guideline overlay and surround view stitching alignment on the centre display.

OEM-Grade Build
Sealed weatherproof housing engineered to withstand UK weather, road spray, jet washing and temperature extremes — built to match factory durability standards.

Compatible Part Numbers
A0009053902 · 0009053902 · A 000 905 39 02

Vehicle Compatibility (GUIDE ONLY — always confirm by part number)

• Mercedes-Benz ML / GL / GLE / GLS (W166) 2012–2015
• Mercedes-Benz E-Class W212 Facelift 2013–2015
• Mercedes-Benz S-Class Coupe / Cabrio 2014–2017

Common Symptoms Resolved
Blank or black screen on the surround view display · distorted, pixelated or frozen image · foggy or cloudy lens caused by failed seals · flickering or intermittent picture · “Camera Unavailable” message · misaligned guideline overlay or stitching artefacts.

Coding/Configuration Notice
This is a direct plug-in replacement and will function immediately on the vast majority of vehicles with no coding required. In rare cases, an Xentry / DAS diagnostic session may be needed to register the new camera — this is performed by any Mercedes-Benz specialist or main dealer.

What’s Included
1 × OEM replacement surround view camera (part number A0009053902).

Additional Details
Every unit is fully bench-tested before packing to confirm correct image output, connector integrity and housing seal.

Returns & Product Integrity Policy
Each camera is supplied with a tamper-evident seal applied to the housing. Returns are accepted on unfitted units only, with the tamper-evident seal fully intact and the item in original resalable condition. Units returned with the seal broken, signs of installation, damaged connector pins or any modification cannot be accepted as the product is no longer in resalable condition.

About this item

• Direct OEM replacement surround view camera for Mercedes-Benz ML / GL / GLE / GLS (W166), E-Class W212 facelift, and S-Class Coupe / Cabrio fitted with the factory 360° surround view camera system
• Restores clear, distortion-free imaging on the COMAND / NTG infotainment display — eliminates blank screen, foggy lens, frozen frames, flickering picture, or “Camera Unavailable” warnings
• OEM-grade optics and sealed weatherproof housing matched to the original Mercedes-Benz Magna camera specification for true factory image quality
• Plug-and-play factory connector — fits directly into the existing Mercedes wiring with no cutting, splicing or adapters required
• Replaces OEM part number A0009053902 (also listed as 0009053902 / A 000 905 39 02) — please verify your existing part number before purchase
• Each unit is bench-tested before packing to confirm full functionality