Description

Rear View Reversing Camera for Kia Sportage 2011-2016, Tailgate Backup Parking Camera, Replaces 95750-3W110

Direct replacement rear view reversing camera for the Kia Sportage 2011 to 2016, supplied for vehicles originally fitted with part number 95750-3W110. Restores the factory reverse view feed to the head-unit display when the original camera has failed.

⚠️ IMPORTANT – PART NUMBER CHECK REQUIRED
Before ordering, please remove your existing camera and check the printed number on the housing. This listing fits vehicles originally fitted with 95750-3W110 or supersession 95750-3W010, 95750-3W100 or 95750-3W120 only. Other Kia Sportage camera part numbers are NOT covered, even if they look identical from the front.

Connector Type
Factory-style Kia tailgate camera connector — plugs directly into the original Sportage wiring loom. No cutting, splicing or adapter required.

High-Quality Imaging
Factory-specification wide-angle lens calibrated to match the original Kia field of view, producing a sharp, true-to-colour image with strong low-light performance and minimal distortion at the screen edges.

Heavy-Duty Build
Sealed housing with factory-style gasket, UV-stable plastics and corrosion-resistant fixings. Designed to withstand UK weather, road spray and automatic car washes.

Compatible Part Numbers
95750-3W110, 957503W110, 95750 3W110, 95750-3W010, 957503W010, 95750-3W100, 957503W100, 95750-3W120, 957503W120

Vehicle Compatibility (GUIDE ONLY — always verify by part number)

• Kia Sportage (SL 3rd generation) 2011
• Kia Sportage (SL 3rd generation) 2012
• Kia Sportage (SL 3rd generation) 2013
• Kia Sportage (SL 3rd generation) 2014
• Kia Sportage (SL 3rd generation) 2015
• Kia Sportage (SL 3rd generation) 2016

Common Symptoms Resolved
Blank or black screen when selecting reverse, flickering or rolling image, snowy or static picture, distorted colours, foggy lens, water ingress, intermittent dropout in cold or wet weather.

Coding / Configuration Notice
This camera is a like-for-like replacement and does not normally require dealer coding. If your vehicle has previously been retrofitted with a different camera variant, a manufacturer diagnostic session may be required to restore overlays.

What’s Included
1 x Rear view reversing camera assembly (95750-3W110 specification). Mounting screws and trim clips are NOT included — reuse your original hardware.

Additional Details
Tested before packing for image output and connector continuity. Packed in protective foam to prevent damage to the lens face.

Returns & Product Integrity Policy
Every camera leaves us with a tamper-evident warranty seal and matched serial record. Returns are accepted on unfitted parts in original condition with the seal intact. Units returned with a broken, missing or altered seal, or showing signs of installation, water damage, impact damage or substitution of a non-matching part, will not be eligible for refund or replacement under our 12 month warranty.

About this item

• Direct replacement for Kia Sportage 2011, 2012, 2013, 2014, 2015 and 2016 tailgate rear view reversing camera — fits vehicles originally supplied with part number 95750-3W110 (also written 957503W110).
• IMPORTANT: Many cameras look identical from the front but use different rear connectors and part numbers — remove your existing camera and confirm it is printed 95750-3W110, 95750-3W010, 95750-3W100 or 95750-3W120 before ordering.
• Factory-style connector plugs straight into the original Sportage tailgate wiring with no cutting, splicing or adapters required for a direct fit.
• Factory-specification wide-angle lens with strong low-light response, producing a sharp picture closely matched to the original Kia image output.
• Heavy-Duty sealed housing with weatherproof gasket and UV-stable plastics to handle UK weather, road spray and automatic car washes.
• Resolves common faults — black screen on reverse, flickering or rolling image, snowy or distorted picture, foggy lens, water ingress and intermittent dropout in cold or wet weather.
• Tested before packing for image output and connector continuity, then packed in protective foam to protect the lens face.
• Tamper-evident warranty seal applied, covered by our 12 month LMAutoParts replacement guarantee when the seal is intact.