Description

Rear View Reversing Camera for Audi Q7 Q5 A4 A5 A7 A8 e-tron 2015-2022, VW Touareg 2018-2022, Replaces 4M0980556A

Direct replacement rear view reversing camera for a wide range of Audi and Volkswagen Group vehicles, supplied for cars originally fitted with part number 4M0980556A. Restores the factory reverse view feed to the MIB display when the original camera has failed.

⚠️ IMPORTANT – PART NUMBER CHECK REQUIRED
Before ordering, please remove your existing camera and check the printed number on the housing. This listing fits vehicles originally fitted with 4M0980556A (also written 4M0 980 556 A, with or without the /DX suffix) only. Other Audi or VW camera part numbers are NOT covered, even if they look identical from the front.

Connector Type
Factory-style Audi and VW camera connector — plugs directly into the original wiring loom. No cutting, splicing or adapter required.

High-Quality Imaging
Factory-specification wide-angle lens calibrated to match the original Audi field of view, producing a sharp, true-to-colour image with strong low-light performance and minimal distortion at the screen edges. Supports moving guideline overlays on vehicles originally equipped with that function.

Heavy-Duty Build
Sealed housing with factory-style gasket, UV-stable plastics and corrosion-resistant fixings. Designed to withstand UK weather, road spray and automatic car washes.

Compatible Part Numbers
4M0980556A, 4M0 980 556 A, 4M0.980.556.A, 4M0980556A/DX

Vehicle Compatibility (GUIDE ONLY — always verify by part number)

• Audi Q7 (4M) 2015-2022
• Audi Q5 / SQ5 (FY) 2018-2022
• Audi A4 / S4 (B9) 2016-2022
• Audi A5 / S5 / RS5 (B9) 2017-2022
• Audi A7 / S7 / RS7 (C8) 2018-2022
• Audi A8 / S8 (D5) 2018-2022
• Audi e-tron 2019-2022
• Volkswagen Touareg (CR) 2018-2022

Common Symptoms Resolved
Blank or black screen when selecting reverse, flickering or rolling image, snowy or static picture, distorted colours, foggy lens, water ingress, intermittent dropout in cold or wet weather.

Coding / Configuration Notice
This camera is a like-for-like replacement and does not normally require dealer coding. If your vehicle has previously been retrofitted with a different camera variant, a manufacturer diagnostic session may be required to restore overlays and guideline functions.

What’s Included
1 x Rear view reversing camera assembly (4M0980556A specification). Mounting screws and trim clips are NOT included — reuse your original hardware.

Additional Details
Tested before packing for image output and connector continuity. Packed in protective foam to prevent damage to the lens face.

Returns & Product Integrity Policy
Every camera leaves us with a tamper-evident warranty seal and matched serial record. Returns are accepted on unfitted parts in original condition with the seal intact. Units returned with a broken, missing or altered seal, or showing signs of installation, water damage, impact damage or substitution of a non-matching part, will not be eligible for refund or replacement under our 12 month warranty.

About this item

• Direct replacement rear view reversing camera for Audi and Volkswagen vehicles originally supplied with part number 4M0980556A (also written 4M0 980 556 A and 4M0980556A/DX).
• IMPORTANT: Many cameras look identical from the front but use different rear connectors and part numbers — remove your existing camera and confirm it is printed 4M0980556A or supersession before ordering.
• Factory-style connector plugs straight into the original Audi or VW tailgate or handle wiring with no cutting, splicing or adapters required for a direct fit.
• Factory-specification wide-angle lens with strong low-light response, producing a sharp picture closely matched to the original Audi image output, including moving guidelines on equipped vehicles.
• Heavy-Duty sealed housing with weatherproof gasket and UV-stable plastics to handle UK weather, road spray and automatic car washes.
• Resolves common faults — black screen on reverse, flickering or rolling image, snowy or distorted picture, foggy lens, water ingress and intermittent dropout in cold or wet weather.
• Tested before packing for image output and connector continuity, then packed in protective foam to protect the lens face.
• Tamper-evident warranty seal applied, covered by our 12 month LMAutoParts replacement guarantee when the seal is intact.