LMAutoParts compatible replacement front view camera for Nissan Qashqai models fitted with part number 284F1-4EA0A / 284F14EA0A. This replacement front camera is designed to restore the front-view image when the original camera has failed, including faults such as a blank screen, distorted image, frozen feed, flickering picture or camera warning message when the factory 360 degree parking camera system is activated.

⚠️ IMPORTANT – PART NUMBER CHECK REQUIRED
Before purchasing, please remove your existing camera and confirm the part number printed on the housing reads 284F1-4EA0A or 284F14EA0A. Several different camera variants were used across the Nissan Qashqai range and they are not interchangeable. The front, rear and side mirror cameras are different parts. Do not order by vehicle model, registration or year alone. If your original part number does not match, this camera may not function correctly.

Camera Position
This is the front view camera, mounted behind the front grille badge. It is not the rear reversing camera and it is not a side mirror camera.

Connector Type
Fitted with an original-style factory connector for direct connection to the existing vehicle wiring harness. No cutting, splicing or adapters are required when replacing the matching original part number.

High-Quality Imaging
Designed to provide a clear wide-angle front-view image through the vehicle’s existing display system, helping restore normal visibility and parking camera operation when the original front camera has failed.

Durable Build Quality
Sealed housing designed to withstand normal UK road use, weather exposure, road spray and temperature changes.

Compatible / Replacement Part Numbers
284F1-4EA0A · 284F14EA0A

Vehicle Compatibility Guide Only

• Compatible with Nissan Qashqai 2017 with factory 360 degree parking camera system
• Compatible with Nissan Qashqai 2018 with factory 360 degree parking camera system
• Compatible with Nissan Qashqai 2019 with factory 360 degree parking camera system
• Also suitable for vehicles fitted with the exact matching original front camera part number listed above

Common Symptoms Resolved
Blank or black screen on the front-view display · distorted or pixelated front image · frozen picture · foggy or cloudy lens caused by failed seals · flickering or intermittent picture · camera unavailable message · poor or missing front camera image.

Coding / Configuration Notice
This is a direct plug-in replacement for vehicles fitted with the matching original part number. In most cases no coding is required. After installation, calibration of the parking camera system may be required using Nissan Consult or a compatible diagnostic tool, especially if the bird’s-eye view image or guidelines require alignment.

What’s Included
1 × LMAutoParts compatible replacement front view camera, replacing part number 284F1-4EA0A / 284F14EA0A.

Additional Details
Each unit is checked before dispatch to confirm image output, connector condition and housing integrity.

Returns & Product Integrity Policy
Each camera is internally marked and supplied with a tamper-evident security shield hologram applied to the housing. Returns are accepted on unfitted units only, with the tamper-evident seal fully intact and the item in original resalable condition. Units returned with the seal broken, signs of installation, damaged connector pins, internal marking removed or any modification cannot be accepted as the product is no longer in resalable condition.

Trademark Notice
Nissan and Qashqai are used only to indicate vehicle compatibility. This is an aftermarket replacement part supplied by LMAutoParts and is not manufactured by, sponsored by or affiliated with Nissan.

About this item

• Direct replacement front view camera for Nissan Qashqai 2017, 2018 and 2019, fitted to vehicles with the factory 360 degree parking camera system
• Mounts behind the front grille badge to provide the front-facing image for the centre display, including the bird’s-eye composite view and front split-screen view
• Factory-specification optics and sealed weatherproof housing — engineered to withstand rain, road spray, jet washing and temperature extremes
• Plug-and-play factory-style connector — fits directly into the existing Nissan wiring harness with no cutting, splicing or adapters required
• Replaces part number 284F1-4EA0A (also listed as 284F14EA0A) — please verify your existing part number before purchase
• Each unit is bench-tested before packing to confirm correct image output and connector continuity