Direct replacement rear view reversing camera for the Hyundai Tucson ix35 2010 to 2013, supplied for vehicles originally fitted with part number 95790-2S011. Restores the factory reverse view feed to the head-unit display when the original camera has failed.

⚠️ IMPORTANT – PART NUMBER CHECK REQUIRED
Before ordering, please remove your existing camera and check the printed number on the housing. This listing fits vehicles originally fitted with 95790-2S011, or the variants 95790-2S010, 95790-2S012, 95790-2S211 and 95790-2S311 only. Other Hyundai or Kia camera part numbers are NOT covered, even if they look identical from the front.

Connector Type
Factory-style Hyundai tailgate camera connector — plugs directly into the original Tucson ix35 wiring loom. No cutting, splicing or adapter required.

High-Quality Imaging
Factory-specification wide-angle lens calibrated to match the original Hyundai field of view, producing a sharp, true-to-colour image with strong low-light performance and minimal distortion at the screen edges.

Heavy-Duty Build
Sealed housing with factory-style gasket, UV-stable plastics and corrosion-resistant fixings. Designed to withstand UK weather, road spray and automatic car washes.

Compatible Part Numbers
95790-2S011, 957902S011, 95790 2S011, 95790-2S010, 95790-2S012, 95790-2S211, 95790-2S311

Vehicle Compatibility (GUIDE ONLY — always verify by part number)

• Hyundai Tucson ix (LM 2nd generation) 2010
• Hyundai Tucson ix (LM 2nd generation) 2011
• Hyundai Tucson ix (LM 2nd generation) 2012
• Hyundai Tucson ix (LM 2nd generation) 2013
• Hyundai ix35 2010
• Hyundai ix35 2011
• Hyundai ix35 2012
• Hyundai ix35 2013

Common Symptoms Resolved
Blank or black screen when selecting reverse, flickering or rolling image, snowy or static picture, distorted colours, foggy lens, water ingress, intermittent dropout in cold or wet weather.

Coding / Configuration Notice
This camera is a like-for-like replacement and does not normally require dealer coding. If your vehicle has previously been retrofitted with a different camera variant, a manufacturer diagnostic session may be required to restore overlays.

What’s Included
1 x Rear view reversing camera assembly (95790-2S011 specification). Mounting screws and trim clips are NOT included — reuse your original hardware.

Additional Details
Tested before packing for image output and connector continuity. Packed in protective foam to prevent damage to the lens face.

Returns & Product Integrity Policy
Every camera leaves us with a tamper-evident warranty seal and matched serial record. Returns are accepted on unfitted parts in original condition with the seal intact. Units returned

About this item

• Direct replacement for Hyundai Tucson ix35 2010, 2011, 2012 and 2013 tailgate rear view reversing camera — fits vehicles originally supplied with part number 95790-2S011 (also written 957902S011).
• IMPORTANT: Many cameras look identical from the front but use different rear connectors and part numbers — remove your existing camera and confirm it is printed 95790-2S011, 95790-2S010, 95790-2S012, 95790-2S211 or 95790-2S311 before ordering.
• Factory-style connector plugs straight into the original Tucson ix35 tailgate wiring with no cutting, splicing or adapters required for a direct fit.
• Factory-specification wide-angle lens with strong low-light response, producing a sharp picture closely matched to the original Hyundai image output.
• Heavy-Duty sealed housing with weatherproof gasket and UV-stable plastics to handle UK weather, road spray and automatic car washes.
• Resolves common faults — black screen on reverse, flickering or rolling image, snowy or distorted picture, foggy lens, water ingress and intermittent dropout in cold or wet weather.
• Tested before packing for image output and connector continuity, then packed in protective foam to protect the lens face.
• Tamper-evident warranty seal applied, covered by our 12 month LMAutoParts replacement guarantee when the seal is intact.